Lamp Par56 Colors 180 Led 18W With Remote Control

Par56 Color Lamp 180 Led 18W With Remote:

• 11 fixed colors including white.
• 5 automatic programs.
• The control is carried out by a remote control that ensures a perfect connection and synchronization.
• In the first
  Before use, it is necessary to synchronize the remote control with one or more lamps installed in the pool.

Universal in size, the PAR56 lamp SeaMAID It is installed without any particular work in all market niches, replacing
from the traditional 300W lamp to incandescence.

• Resistant:
  • Made by injection of polycarbonate that gives it very high resistance to shocks, heat and chemical attacks from water treatment products.
  • Two screw terminals molded in the material guarantee great solidity to the connection of the power cable to
    12 volts.
• Competitive and effective: The optics, specially developed for aquatic lighting and friction welding, allow obtaining a
  excellent distribution of light in the pool, harmonious and not dazzling for bathers.
• Economical: The light source composed of LEDs allows significant savings for both the user (energy and maintenance) and the professional, in the construction of a pool (savings in materials and labor).
  • A 2×1,5 mm² section cable connected to a 50W safety protected transformer is sufficient for installation
    of a SeaMAID PAR56 lamp.
• colored lighting:
  • To create colored environments in the water, this lamp offers 11 colors
    fixed and 5 automatic programs.
  • Exclusive SeaMAID optics ensure a mix
    harmonious of colors
  • Memory of the last used program and the Reset function.

Get the latest technology for your swimming pool at hidromaronline.com .

INSTALLATION RECOMMENDATIONS

• These pool lamps must be connected to a double-wound safety transformer whose power is at least 20% greater than the total power absorbed.
• During assembly, it is necessary to grease the rear part (lubricating tube supplied) of the lamp to allow easier installation of the waterproof hood and to change the seal of the projector if it has already been used.
• Upon first use, it is necessary to configure the remote control provided with lamps 501139 and 500682.
• Optionally, you can install a switch between the bulb (or group of bulbs) and the ~12V transformer to control
  Remote On/Off versions or synchronize multiple installation.