Multicyclone 12 Pre-Filter

The MultiCyclone is a pre-filtration device capable of saving water and reducing filter maintenance. It is installed behind the filtration pump and in front of your pool's filtration system, be it a sand filter, a cartridge filter, etc. and prevents most of the dirt from going into the filter.

The MultiCyclone retains 70% of particles between 50 and 80 microns and 100% of particles larger than 100 microns.

Minimum flow: 2.4 m3/hour – Maximum flow: 18m3/hour.

The MultiCyclone works on the basis of centrifugal water filtration. There are no moving parts to wear out, and you have no filter media to clean or replace.

The MultiCyclone prolongs the life of your filter and reduces water consumption by doing part of the work.

The MultiCyclone is easy to install and is suitable for most pool filtration systems. It has no moving parts that can wear out and need to be replaced, and it's also covered by a two-year warranty.

You only need 15 liters of water to clean the MultiCyclone. At the same time that the pump is running, you will simply have to open the bleed valve until the dirt has flowed out.

Advantages:

• Contains no filter element to clean or replace.
• It has no moving parts.
• Reduces the need for backwashing.
• Reduces filter maintenance.
• Perfect for new installations or for existing installations.
• Two-year product warranty.
• Supplied with metric and imperial quick connects, and with bleed valve.
• It may be applied to the swimming pool industry, the water treatment industry and the aquaculture industry.

Operating mode:

• • The water enters the device tangentially, through its 12/16 hydrocyclones, generating a strong centrifugal effect.
  • The dirt is sent out, towards the walls of the hydrocyclones, and then enters a spiral path to the transparent tank*.
  • The filtered water passes into the center of the hydrocyclone where the flow reverses and the water spirals upward through the outlet.
  • Accumulating sludge can be easily monitored through the Multicyclone's transparent dirt container.
  • The MultiCyclone is easily cleaned after opening the valve. Only 15 liters of water will be used to clean the MultiCyclone.

*The MultiCyclone is designed to filter dirt that is heavier than water, floating dirt cannot be filtered through centrifugal filtration.